AC Panel Three Phase Multifunction Energy Meter SPM33 with Modbus
Main Documents
Compatible Software
Smart PiEMS System
-
SPM33 is a low-cost, economical power meter that is suitable for both low and high voltages up to 650kV.
It provides a dual source kWh record for both the grid and generator, making it a great choice for those in
need of an accurate power measurement device. The built-in MODBUS-RTU protocol makes the SPM33
compatible with most system integration requirements, making it a versatile and useful tool for a wide
variety of applications.
- Real-time measuring data include:
Three phase voltage, current, active power, reactive power, apparent
power, power factor, frequency, phase angle. (Optional: Displacement power factor)Energy data: Imp. & Exp. Energy , (Optional: Multi-tariff energy, four-quadrant energy)
Demand data: Demand and peak demand for 3 phase current, 3 phase active power, total active power. (Optional: Forecast demand, monthly peak demand)
Power quality data: Up to 63 rd harmonic, harmonic ratio (HRU, HRI), THD, Unbalance. (Optional: current K factor, voltage crest factor, current TDD)
SPM33 provides the main function as below
-
.Optional History Data record: Last 12 monthly energy, and last 10 yearly energy..Optional SOE event log: 64pcs of event log, 10pcs of operation log..Alarm function: Alarm for over-voltage, under-voltage, over-current, under-current, phase lost, over-frequency, under-frequency, over power, phase error, DI 1, DI 2 status change..2 digital input (wet contact) .
.Optional 4 DI (wet or dry) ..Optional 4 relay output
.One RS485, Modbus-RTU protocol .Rated input 1A or 5A settable.
.1 phase or 3 phase settable
Specification
Connection Mode |
1 phase 2 wires,3 phase 3 wires 3 phase 4 wires |
Power Supply |
85~265VAC or 100~300VDC |
Metering |
True RMS,1 sec refresh time |
Power loss |
<5VA |
Input |
Rated current:5A or 1A Rated voltage:220/380V,35Hz-65Hz |
Communication |
RS485 serial,support Modbus-RTU Baudrate:4800,9600,19200 bps Address:1~247 Optional RJ45,support Modbus-TCP |
Overload |
Current: 120%of rated,continuously Instantaneous current:10 times/ | ||
Dimension (L x W x H) |
Panel:96x96x18 mm Cut-out:89.5x89.5x69.8 mm(+0.5mm) | ||
Low voltage system Up to 400V(L-N)/650V(L-L) High voltage system Up to 650kV | |||
lP index |
IP54(front panel)and IP20(case) | ||
Weigh |
Approx.500gr. |
Status input (optional) |
≤6 channels Wet contact (active status input):voltage less than 60V is open,more than 140V is closed,the maximum input is 300V Optional dry contact output:DC30V |
Environment |
Normal operating temperature:-10℃~+55℃ Operating temperature:-25℃~+55℃ Storage temperature:-40℃~+70℃ Humidity:5%-95%non-condensing | ||
Relay output (optional) |
≤4 channels Node capacity:250Vac/5A |
Standard (EMC) |
Electrostatic discharge immunity test IEC61000-4-2,Level4 Radiated immunity test IEC61000-4-3,Level4 Electrical fast transient/burst immunity test IEC61000-4-4,Level4 Surge immunity test(1,2/50μs~8/20μs) IEC61000-4-5,Level 4 | ||
Power frequency withstand voltage |
AC 4KV/minute | ||||
Insulation resistance |
≥100MQ | ||||
Impulse withstand voltage |
6kV(peak),1.2/50uS | ||||
Parameter |
Accuracy |
Measuring Range |
|||
Voltage |
0.2% |
Direct input line-line 10~500V,Line -neutral:10~400V PT primary:650KV,PT secondary:100-400V |
|||
Current |
0.2% |
CT primary:50,000A,CT secondary:5mA-6.5A |
|||
Power factor |
1.0% |
-1.0000~1.0000 |
|||
Active power |
0.5% |
0~±9999MW |
|||
Reactive power |
1.0% |
0~±9999Mvar |
|||
Apparent power |
1.0% |
0~9999MVA |
|||
Active energy |
0.5% |
0~99,999,999.9 kWh |
|||
Reactive energy |
2.0% |
0~99,999,999.9 kvarh |
|||
Apparent energy |
2.0% |
0~99,999,999.9 kVAh |
|||
Voltage or current unbalance |
1.0% |
0%~100% |
|||
Harmonic |
Class B |
0%~100% |
video
Incorporate craftsmanship and responsibility into the products, Pilot Technology continues to promote the construction of standardized, automated and informational production lines to realize the digital intelligentize of production.
Learn more from our product video review.